installation instructions
1. Remove the existing shower head leaving
shower arm.
2. Screw Anti-Siphon Device (A) into exist-
ing shower arm.
3. Place rubber gasket (included) into Ro-
tator Joint (B) and screw Rotator Joint
into the other end of the Anti-Siphon
Device.
4. Locate the end of the hose that has a
bolt on the end and screw it onto the
Rotator Joint (B).
5. Screw the other end of hose into the
new shower head (C).
6. Hang shower head on bracket end of
Anti-Siphon Device (A) when not in
use.
Rev1.05.09.14
Existing Shower Head
B
Anti-Siphon Device
A
Shower Head
C
Escutcheon
Shower Arm
