Prism Electric Scooter
Page 4 of 15
Owner’s Handbook (Code: Z40949 Rev A)
3.
PARTS INTRODUCTION
CONTROL
PANEL
CHARGER
SOCKET
TILLER
ADJ. KNOB
DRAG
HANDLE
FRONT
WHEEL
LOCK
ARM
REST
SEAT
SEAT
POST
SEAT
ROTATION
LEVER
BATTERY
PACK
CONTROL
PANEL
CHARGER
SOCKET
TILLER
ADJ. KNOB
FRONT
WHEEL
LOCK
KEY
IGNTION
ARM
REST
SEAT
SEAT
POST
SEAT
ROTATION
LEVER
BATTERY
PACK
CIRCUIT
BREAKER
SEAT
POST
PULL
HANDLE
FREE-
WHEEL
LEVER
ANTI TIP
WHEEL
Please note that the detachable body shrouds are not
identified on this parts description.
For more information about the body shrouds please
refer to the installation instructions supplied with the
body shroud packs.
A copy of these instructions is also contained at the
back of this manual.
4.
OPERATION
4.1 Control Panel
Please note the Prism Sport has a slight different
control panel layout, but functions are the same.
4
7
6
CHARGER
SOCKET
SPEED
DIAL
HORN
WIGWAG
PADDLE
KEY
IGNITION
POWER
EYE
BATTERY
GAUGE
4.2
How To Operate Your Scooter
•
Key Ignition. The key ignition acts as the power
switch for the scooter. To switch the power on, turn
the key clockwise and power eye should illuminate.
To switch the power off, turn the key anticlockwise,
after which the power eye should switch off and the
key can be removed.
Do not turn the ignition off whilst driving
as this will lead to an emergency stop and
possible risk of damage or injury.
•
Speed Dial. Turn the speed dial to determine the
maximum speed of the scooter. Turn the dial
clockwise to increase the speed setting and turn the
dial anticlockwise to decrease the speed setting.
Do not adjust the speed dial whilst driving
as this could result in loss of control. Do
not set the highest speed whilst driving
indoors.
