Spacer
9
Fitting the Forearm Platform -
continued
Fitting the Outdoor Wheels
Outdoor wheels replace the existing front castor wheels. They are a larger diameter
(9”) and are locked in a forward facing position so are better at negotiating rougher
terrain and small obstacles.
Remove the existing front wheels and replace with the outdoor wheels following step
2 on page 5, ensure the buttons lock into position. Ensure that the outdoor wheels
are set at an equal and comfortable height. Adjust the height of the rear wheels if
required. The height should be set so that the hand grips are near horizontal.
Step 1
Bolt on the armrest. The armrest comes
with 2 spacers for lateral adjustment,
these should fit between the armrest and
the armrest support as required. Secure
the arm to the armrest support using the
nuts, bolts and washers supplied.
Slide in the handgrips to the required
position and tighten using the knob on
the underside. The hand grips can also be
rotated by sliding out rotating and sliding
back in, tighten the knob. The hand grips
can be angled forwards as required by
releasing the lever, adjusting the hand grip
and retighten.
Step 3
Step 4
Knob
Lever
