6
Cleaning Procedure:
(After the last treatment of the day.)
Please utilize the following steps to thoroughly clean your nebulizer after the
last treatment of the day, unless otherwise specified by your physician.
1. Prepare a solution of one part white vinegar with three parts distilled water.
2. Submerge the nebulizer, mouthpiece, and/or mask in the vinegar and
water solution for (30) thirty minutes.
3. After soaking the nebulizer and components for thirty minutes in the
prepared solution, completely rinse them under hot tap water.
4. Allow to air dry.
5. Reassemble the nebulizer and store the parts in a cool, dry, clean, sealed
container.
Cleaning the compressor unit:
1. Wipe daily with a damp cloth.
2. Never use powdered cleaners or soap pads, which may damage the finish.
Filter Replacement:
1. Use only MQ5500 filters. Do not use cotton or any other materials. Do not
wash or clean the filter. Never operate the compressor without a filter.
2. Changing procedure:
A. Open the filter cover
B. Replace the used filter with a new one.
C. Close the filter cover.
