Underside details are
shown as dashed lines
Push top of
Cord Lock (D)
down and pull
Cord (C) to
tighten.
INSTALLATION:
1
.Clip adjustable Straps
(A) around your bench seat
head rests so that the
cover aligns itself with your
vehicle’s seat. Tuck plastic
pipes (E) located on back of
BSC, in the crevice where
the seat base meets the
seat back.
2.
OPTIONAL
There is an optional Back
Strap (B) that attaches
around the back of your
seat, clipping together in
the back. This is for extra
fitting support in vehicles
where the seat folds down.
3.
Take the underseat
Elastic Cord (C) and pull
down over each side of
your seat bottom. Tighten
at each Cord Lock (D) as
necessary.
NOTICE: Please contact Kurgo directly with any product or warranty inquiries.
Kurgo Products
•
2D Fanaras Drive, Salisbury, MA 01952
•
877-847-3868
•
www.kurgo.com
•
kurgo.com/product-instructions
6-15
Instructions and care
Our product cleaning instructions will help ensure that your gear has a long, exciting life. Washing by hand and hang
air-drying is the best way to care for your Kurgo products.
Hand Wash Instructions
1. Brush off loose dirt with a dry brush.
2. Spot clean with a damp sponge, cold water, and mild soap. Avoid harsh detergents.
3. If necessary, rinse larger area to eliminate excess soap residue.
4. Hang to air dry (do not machine dry).
Cleaning Instructions
E
E
