assembly instructions
Weight Capacity: 400 lbs (181 Kg)
1. Remove contents from carton.
2. Turn seat up-side-down. Place the leg section
marked with a “B” into the groove on the bot-
tom of the seat. Place leg section “A” on top of
section “B” and secure both in place by insert-
ing a thumb screw through the middle hole as
shown below.
4. Insert legs into leg frames by depressing push
pins, sliding legs over the receptacle and set-
ting to desired height. Make sure all the legs
are set to the same height.
3. Finish securing the legs in place by inserting
the remaining 4 thumb screws into the 4 outer
holes and tightening as shown below.
1. Before use, adjust height of each
leg to your specific needs, mak-
ing sure all legs are at the same
height. When desired height
is reached, lock legs into place
by aligning buttons into proper
holes, per illustration.
2. To be sure legs are locked into
place by pushing down on or by
pulling legs.
Rev.2.06.19.13
