Drive DeVilbiss HW009COP, Руководство пользователя

Страница: 15 / 29

Dual Wheel Scooter
Owner’s Manual
Issued 2018/11
15
V. PARTS
Moving and Braking. To move forward, squeeze the right hand side of the wigwag paddle
with your hand towards you whilst holding the handle bars. Squeeze the left hand side of the
wigwag paddle towards you and the scooter will move backwards. To brake, release the
wigwag paddle which will return to neutral and activate the electromagnetic brake
automatically and bring the scooter to a prompt stop. The wigwag paddle allows you to
control the speed of the scooter up to a maximum speed determined by the Speed Dial. The
further the wigwag paddle is deflected, the faster the scooter will go (up to 4mph).
Warning: Do not operate both left and right hand sides of the wigwag
simultaneously. You will not be able to control the scooter.
Horn Button. Press the horn button to sound the horn. Release the button to stop the horn.
The horn is the green button located on the control panel.
Braking
– Electromagnetic Brake. Release the wigwag paddle completely, and the
electromagnetic brake will be activated automatically and the scooter will stop.
Light.
Press the light switch to turn on the headlight. Press light switch again to turn the
light off.
Note: the light will only operate if the scooter is switched on at the ignition.
Handlebar Height Adjustment.
Turn the large adjustment knob on the front of the tiller
anticlockwise to release the handlebar. Slide the handlebar to the required position, then turn
the knob clockwise to secure the handlebar in place.
Battery Gauge. The battery gauge on the tiller console lights LEDs to show
remaining power:
Green (3 or 4 LEDS lit) - 40% - 100% capacity
Yellow (2 LEDs lit) - draining charge (10% - 30%)
Red (1 LED lit) - immediate recharge is necessary.
The remaining power indicated by the battery gauge will vary by the
driving time incurred and how you drive. Repeated starting, stopping and
climbing will consume power more quickly.
VI. OPERATION