HW007 Scooter Owner’s Handbook (HW007_IFU 08/15)
Page 12
position. If the scooter is in the free wheel mode (motor is disengaged), you can use the manual parking brake
function by moving the engaging/disengaging lever back into the engaged position by an attendant.
Thermal Protection:
Your scooter controller is equipped with a safety system called thermal rollback. A built-in circuit monitors the
temperature of the controller and motor. In case of excessive heat of the controller and motor, the controller will
cut-off the power to allow the electrical components to cool down. Although your scooter will resume its normal
speed when the temperature returns to a safe level, we recommend to wait for 5 minutes before restarting to allow
the components to cool down.
In some circumstances the scooter may slow down, regardless of desired driving speed, prior to this happening.
This is normal. However repeated occurrences should be reported to your dealer.
Main Circuit Breaker:
The main circuit breaker reset button is located on the top of the battery box.
The main circuit breaker monitors the electric current drawn from the battery. It is a safety feature built in your
scooter for your extra safety. When the batteries and motor are heavily strained (e.g., from excessive loads), the
main circuit breaker will trip to prevent damage to the motor and the electronics. If the circuit breaker trips, turn off
the scooter and wait for approximately one minute and then depress the button to reset it. Then turn on the
scooter, and continue normal operation. If the main circuit breaker continues to trip repeatedly, this indicates a
fault so contact your authorized dealer.
BATTERY AND CHARGING INSTRUCTION
We recommend that you use deep-cycle batteries that are sealed and maintenance free for your scooter. Both
sealed lead-acid (SLA) and gel cell are deep-cycle batteries and are similar in performance. Deep-cycle batteries
are specifically designed to provide power, drain down, and then accept a relatively quick recharge. Lead-acid
batteries should be charged as often as possible.
Specification of the battery that we recommend for the HW007 scooter is
Type:
Size:
Voltage:
Deep –cycle sealed lead-acid or gel cell
22AH
12V each
HW007 Scooter Owner’s Handbook (HW007_IFU 08/15)
Page 11
Note: In case of emergency, release the wigwag paddle the vehicle will come to a stop.
Free-Wheeling:
1.
The motors are designed to engage the electromagnetic brakes when the vehicle is not in use or when the
power is OFF. They also have a manual feature that allows them to “free-wheel” so the scooter can be moved
without turning it on. Free-wheeling is accomplished by adjusting the free-wheeling lever to the free-wheel
position.
Warning
!
Never free-wheel your scooter on a gradient.
Never free-wheel the motors whilst sat on the vehicle.
Always remember to engage the motors before turning the power ON.
Electromagnetic Brakes:
Your scooter comes with Electromagnetic Brakes., i.e. an automatic magnetic disc safety brake which is also known
as Fail-Safe brake. The electro-magnetic Brakes are automatic and work when the scooter is ON but in a steady
state (i.e. Wigwag is released to the neutral position), even when the scooter is on a slope. The Electromagnetic
Brakes will also be set whenever the scooter is OFF, but the motor levers are in the engaged (vertical) position.
Parking brake:
There is an automatic parking brake function included in the electromagnetic brake. The scooter will stop when the
motor is engaged and the power switch is off or when the power switch is on and the wigwag is in the neutral
Wigwag Paddle
Free- Wheeling Lever
Содержание HW007
Страница 1: ...HW007 User Manual ...
