Drive DeVilbiss Healthcare Elite Скачать руководство пользователя страница 10

Elite Mattress with PUMP1000 

 

Cleaning 

The following guidelines are suggested by Drive DeVilbiss Healthcare as being suitable infection 
control procedures. Further information is available upon request.  

 

Pump Unit  

 

General cleaning may be affected by using a cloth dampened with a mild detergent and water 
solution. This approach may be followed either by wiping with a sodium hypochlorite solution to a 
dilution of 1000 ppm or by using an alcoholic wipe.  

 

 

WARNING:   Do not use phenolic or biological based cleaning solutions 

Do not use any abrasive compounds or cleaning pads 
Do not submerge the pump in to water or any other liquids 
Ensure that mains power supply to the pump has been disconnected prior to 
cleaning. 

 

Mattress

 

 

General Cleaning  

 

During general use, the mattress and tube set may be cleaned using a neutral detergent solution. 
Using a single use wipe, clean the mattress cover and/or tube set with a solution of neutral 
detergent and hot water. Rinse thoroughly with clean water and a damp single use wipe. 

 

NOTE:  The top, bottom and all four sides of the cover and tube set, including under the zip flaps 

MUST be cleaned.  

 

 

The foam used in this product cannot be decontaminated, therefore, it is recommended 
that any contamination must result in the foam being replaced 

 

 

 

WARNING:   Do not use phenolic or biological based cleaning solutions 

 

Do not use any abrasive compounds or cleaning pads 

Ensure the cover and tube set are completely dried before refitting the cover.   

 

Disinfecting the mattress   

 

If the cover is heavily soiled or has been exposed to bodily fluids such as blood, it will require a 
thorough cleaning procedure:  

 

Wipe the cover using a single use wipe with Chlorine Solution (of up to 10,000ppm) and cold water. 
Rinse thoroughly with clean water and a damp single use wipe. Make sure the cover is completely 
dried before refitting or storing.   

 

Wipe the cells using a single use wipe with Chlorine Solution (1,000ppm) and cold water.  Rinse 
thoroughly with clean water and a damp single use wipe. Make sure the cells are completely dried 
before refitting or storing.   
 
Frequent or prolonged exposure to higher concentration disinfectant solutions may affect the 
longevity of the mattress and affect its functionality.    

 

NOTE:  Some surface wrinkling may also occur 

 

 

 

 

Содержание Elite

















Отзывы: