S1 Steel Wheelchair (Issued 2021-08 rev1)
Page 9 of 12
care and maintenance
Do not use a damaged or badly worn wheelchair. Users should routinely check for
any malfunctions or changes in performance. Contact Drive DeVilbiss Healthcare
Ltd or your provider to replace damaged or worn parts.
• Brakes and tyres should be checked before each use, and at least once a month.
Slightly loosen and tighten the lock nut on the axle to correct any side play.
• The wheelchair should be kept dust free and cleaned at least once a week.
Upholstery and tyres can be cleaned with a damp cloth and mild soap solution.
Avoid neat bleach or abrasive surface cleaners. Leave to fully dry before reuse.
Metal parts should also be polished once a month with an auto wax. Replace
worn or torn upholstery promptly, as it may not support your body weight.
• Drive DeVilbiss Healthcare Ltd recommend that an approved service engineer
maintains the wheelchair annually, and these items should be repaired,
replaced, adjusted and/or lubricated if required:
•
When the product has reached the end of its useful life, follow local recycling
and disposal policies.
•
Tyres and castors
•
Wheel bearings
•
•
Brakes
•
Footrest locking mechanism
Seat upholstery
•
•
Back upholstery
•
Arm pads
•
Rear wheel quick release pin
•
Back posts
Wheelchair folding mechanism
powerpack installation
This wheelchair is suitable for some retrofit
powerpacks, which allow the device to be
controlled electronically. (See
Powerpack
example
image.)
Powerpacks are not required to use the
wheelchair. The mounting position will need
adapting to be suitable for both the user and the
powerpack used. Any installed powerpack must
be used in line with the manufacturer’s instructions
for use.
For more information about powerpacks, contact
Drive DeVilbiss Healthcare Ltd or your local dealer.
Powerpack
example