20
Instructions for use LITEC 2G PLUS
Drive Medical GmbH & Co. KG | As per: 24.06.2020 | Errors and alterations excepted
EN
To facilitate transferring into and out of the wheelchair,
the operating lever of the parking brake can be folded
down.
(photo 27+28). To do this, pull the lever upwards
and then fold it down.
Adjusting and using
the hand brake (optional)
Upon delivery, the optio-
nal hand brake is correctly
adjusted for the attendant.
If braking is insuffi
cient,
this can be increased by
unscrewing the adjusting
screw and decreased by
screwing in the adjusting
screw (
photo 29).
For adjustment, fi rst remove the locking nut and then
perform the corresponding adjustment; thereafter re-
tighten the locking nut and in doing so, use pliers to hold
the adjusting screw. To brake the wheelchair by the at-
tendant, pull up both brake handles at the hand grip.
To apply the brakes (such as for parking), you can lock the
brake handle in the braking position by simply pushing
the locking mechanism forwards with your fi nger until it
snaps into place; to unlock, push the locking mechanism
back (
photo 30+31).
30
31
If you need to step away from the wheelchair while it is
occupied, it is essential to additionally apply the parking
brake.
Operating the tilting aid
To maneuver around
curbstones and over
thresholds step fi
rmly
(with the left or right foot)
on the tilt aid while simul-
taneously pushing down
the handles. This ensures
that lifting the front of the
wheelchair is easier. En-
sure that you are standing
securely (
photo 32).
Operating the anti-tilt aid
The height of the anti-tilt
support can be adjusted
by releasing the lock
(pho-
to 33).
Collapsing
For easier transport or for stowing in motor vehicles, the
wheelchair can be collapsed with just a single maneuver.
To do this, fi rst remove the optional seat cushion as well
as the footrests, then grasp both looped handles loca-
ted at the side of the seat surface cushion and pull the
wheelchair upwards (
photo 34+35).
34
35
27
28
29
33
32
