www.petfountain.com · www.petsafe.net
www.petfountain.com · www.petsafe.net
12
13
FOUNTAIN REASSEMBLY
9)
If using the fountain indoors,
fill as directed on page 6.
If using the fountain outdoors,
fill as directed on page 6.
Make sure the cord, the adaptor and your hands are completely dry, then plug
the fountain into an electrical outlet.
UNDERSTANDING THE DRINKWELL
®
EVERFLOW PARTS
Foam Filter: is intended to catch large debris, hair and food left in the water before
it reaches the pump. Improves the overall cleanliness of the water and the pump in
between cleanings.
Hose Quick Connectors: used to attach and reattach a garden hose to Everflow
without the need to unscrew.
Hose Connect: can be used to connect Everflow to a garden hose in a more
permanent manner and in lieu of using the Quick Connector.
Float Valve: used to set the desired water level in the bowl. The float can be
removed and repositioned on either side of Everflow, or removed altogether for
indoor use.
Indoor Plugs: with the float valve removed, these must be used to transition
Everflow to an indoor fountain.
Outflow Tube: directs water from the pump into the bowl to create a current within
the bowl that helps inhibit bacteria build up and move debris towards the filters.
Pump: a submersible pump that features an anti-bite cord cover and outdoor
rated power adaptor. (Model SP-880 - AC 12V ~60Hz/7.7 W) THE PUMP IS NOT
DISHWASHER SAFE, hand wash only as instructed in the “Pump Maintenance”
section of this operating guide. Always unplug and remove the pump prior to
cleaning the fountain.
5)
6)
7)
8)
9)
10)
11)
1)
2)
3)
4)
Components
Housing
Lid
Housing
Bowl with Pump
Cord with
Anti-Bite Cover
Adaptor
Outflow Tube Foam Filter
Charcoal
Filter
Indoor Plugs
and Washers
Hose
Connect
Hose Quick
Connectors
Float Valve
UNDERSTANDING THE DRINKWELL
®
EVERFLOW PARTS
Bowl: the bowl is the foundation of the fountain and provides a large drinking
area for pets. The bowl features cutouts on the sides to help carry and place the
fountain.
Housing: the water is pumped into the housing to cycle through a charcoal filter
and out the spout to create a free-falling stream of water for pets to drink from.
Housing Lid: snaps on to the back of the housing and encloses the filter.
Charcoal Filter: is a replaceable 3-layer charcoal filter with granulated carbon
made from coconut shells. The charcoal filter absorbs bad tastes and odors as the
water passes through the filter and helps keep the water tasting fresh and
appealing to pets. The duo-density polyester pad helps catch hair and debris to
keep the water cleaner.
