www.petfountain.com · www.petsafe.net
www.petfountain.com · www.petsafe.net
4
5
Your fountain comes equipped with two different filters, a charcoal filter that
removes bad tastes and odors and a foam filter to trap larger debris before it
reaches the pump.
Components
192 oz /1.5 gal Water Capacity
Features
DO NOT RUN DRY.
FOR INDOOR HOUSEHOLD USE OR SEASONAL OUTDOOR USE.
OPERATING INSTRUCTIONS
1)
2)
As with any electrical device, check the electrical cord for any tears, or damage
before use.
Make sure the low-voltage power adaptor is tightly connected to the pump’s
electrical cord and that the threaded locking collar is tightened completely, see
Figures 1a & 1b.
Quick Connector allows
for easy removal and
attachment to standard
garden hose
Anti-Bite
Cord Cover
Float Valve always
keeps the fountain
full and can be
adjusted to set the
desired water level
Attaches to garden
hose to keep the
fountain full all the time
Charcoal filter removes bad
tastes and odors from the
water, keeping water fresh
Lid locks in place to
prevent accidental
removal by pets
Patented Free-Falling Stream
encourages pets to drink
more water and adds
oxygen for freshness
Split water flow improves
aeration and helps move debris
towards filters
Constant
circulation inhibits
bacteria growth in
between cleanings
Outdoor Rated
low-voltage submersible
pump for safe and quiet
operation
Plugs included for both**
openings to use the fountain
indoors
UV Resistant Plastic &
Dishwasher Safe
Foam filter catches dirt and debris
before it reaches the pump, helping to
maintain a constant flow rate
Receiving ramp reduces
splash and sound from
falling water
U.S. Patents Numbers: 5799609, 5842437
Housing
Lid
Housing
Bowl with Pump
Cord with
Anti-Bite Cover
Adaptor
Outflow Tube Foam Filter
Charcoal
Filter
Indoor Plugs
and Washers
Hose
Connect
Hose Quick
Connectors
Float Valve
EVERFLOW
Installing the Charcoal Filter:
Open the housing lid to place the Charcoal
Filter (one filter is included with your fountain).
The Charcoal Filter fits between the grooves
in the housing with the black side facing out
towards the bowl, as shown in Figure 2. Make
sure the filter is pushed all the way down, and
lid is reattached.
Installing the Foam Filter:
The Foam Filter will come installed around the
pump beneath the housing. You will be able to
see the Foam Filter in place by looking through
the pre-filter on the right side. The Foam Filter
can be easily removed later for cleaning by
lifting it straight up as shown in Figure 3.
Place the fountain in a desired location. The
Everflow Fountain is intended for
year-round indoor household use or seasonal
outdoor use. Never operate the fountain in temperatures below 40° F / 4.4° C.
When using the fountain outdoors, it should be placed in a shady area away from
direct sunlight. This will keep the water cool.
IMPORTANT: Rinse charcoal filter thoroughly under cool water before placing in
the housing. This will remove any loose charcoal dust, which is harmless. A small
amount of charcoal dust may shed for the life of the filter. This is normal and not
harmful to your pet.
Fig. 3
Fig. 2
3)
4)
Fig. 1a
Fig. 1b
** The fountain will not refill automatically
when disconnected from the hose, please
monitor and refill as needed when used indoors.
