www.petfountain.com
Lack of cleaning may result in loss of normal function! Clean the fountain and the
inside cavity of the motor with soapy water about every two weeks. In between
(weekly), take apart and rinse with hot water.
1. Lift the reservoir container out of the back of the fountain and quickly turn
upright.
2. Unscrew the reservoir lid and remove the O-ring.
3. Unplug the fountain, remove the cover and pull
out the filter.
4. Empty the water out of the fountain.
5. Remove the upper housing of the fountain by
pressing in the tabs at the sides (Fig. 6) and lifting
up.
6.
The flow control knob and stator are not attached and are freed when the
housing is removed.
7. Remove motor from fountain (see motor cleaning instructions).
8. Hand wash the rest of the fountain parts with a mild detergent and rinse well.
If your dishwasher runs too hot the plastic may be damaged. The reservoir is
not dishwasher safe.
CLEANING
The Fountain Must Be Cleaned To Continue Working Normally!
FOUNTAIN:
FILTERS:
4
1. Filters should be changed every four to six weeks. Replace filters more
frequently when using the fountain for multiple dogs and dogs that produce a
lot of saliva.
2.
For replacement filters, visit a pet store near you or call 866-322-2530.
3. Filters may be rinsed out when the fountain is cleaned. Do not wash with
soapy water since you cannot remove all the soap residue.
4. Filters are an added feature of the fountain. Their use is not required for
normal operation.
Fig. 6
