background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 68420

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to 

potential personal injury hazards.  Obey all safety messages 

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMPORTANT SAFETY INFORMATION

Charger Safety Warnings

Read all safety warnings and all instructions.  

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.   

Save all warnings and instructions for future reference. 

The warnings, precautions, and instructions discussed in this instruction 

manual cannot cover all possible conditions and situations that may occur.  

It must be understood by the operator that common sense and caution are factors 

which cannot be built into this product, but must be supplied by the operator.

1. 

The battery Charger gets hot 

during use.  The Charger’s heat 

can build up to unsafe levels and 

create a fire hazard if it does not 

receive adequate ventilation, due to an 

electrical fault, or if it is used in a 

hot environment.  Do not place the Charger on 

a flammable surface.  Do not obstruct any 

vents on the Charger.  

Especially avoid 

placing the Charger on carpets and rugs; 

they are not only flammable, but they also 

obstruct vents under the Charger. 

Place the Charger on a stable, solid, 

nonflammable surface (such as a stable metal 

workbench or concrete floor) at least 1 foot 

away from all flammable objects, such as 

drapes or walls.  Keep a fire extinguisher and 

a smoke detector in the area.  

Frequently monitor the Charger and 

Battery Pack while charging.

2. 

Charge only designated battery packs; 

others may overheat, leak, or burst.

3. 

Follow charging instructions.

4. 

Do not insert damaged battery pack.

5. 

Check frequently while charging.

6. 

Wear ANSI-approved 

safety goggles during use.

7. 

Use chargers only with specifically 

designated battery packs.

 

Use of any other battery packs may 

create a risk of injury and fire.

Содержание 68420









Отзывы: