User Manual
HORNO A GAS |
ROMA 76
15
Connection to the gas system must be made in such a way as not tot cause any
stress of any kind on the appliance. There is an adjustable L-shaped pipe fitting on
the supply ramp to the appliance, whose watertightness is ensured by a seal.
Should you need to turn the pipe fitting, you must in all cases replace the seal
(provided with the appliance). The gas supply pipe fitting is a threaded 1/2 gas
cylindrical male attachment.
Connecting a flexible jointless stainless steel pipe to a threaded attachment
The gas supply pipe fitting is a threaded 1/2 gas cylindrical male attachment. Only
use pipe and seals that comply with the current National Norms. These pipes must
be installed so that their length is never any longer than 2000mm when fully
extended. Once the connection has been made, ensure that the flexible metal pipe
does not touch any moving parts and is not crushed.
Checking that the connection is tight
When installation is complete, check the pipe fittings for leaks using a soapy
solution. Never use a flame.
Adapting to different types of gas
In order to adapt the oven to a different type of gas with respect to the gas for which
it was manufactured (indicated on the label), follow these simple steps:
a) Replacing the oven burner nozzle
Open the oven door fully
Pull out the sliding oven bottom
Unscrew the burner fastening screws
Remove screw
“V” and then the oven burner;
Unscrew the oven burner nozzle using the special socket spanner for the
nozzles, or a 7mm socket spanner, and replace it with a nozzle suited to the new
type of gas (see Table 1)
Take particular care handing the spark plug wires and the thermocouple
pipes
Содержание Roma 76
Страница 1: ......
