drexel und weiss aerosmart L, Эксплуатация, техническое обслуживание и пусконаладка

Страница: 16 / 28

aerosmart - Operation, Maintenance and Commissioning Page 14
Menu levels
The individual software areas are divided into levels. Press the 'Esc' button to access the main
menu with the following submenus:
Statusebene Status Level
Technikerebene Technician Level
Herstellerebene Manufacturer Level
Übersicht Overview
Use the arrow keys to select a sub-menu.
Press 'Enter' to confi rm your selection.
Status Level - Viewing Operating Parameters
All available measurements and settings can be requested in the status level. The values
cannot be adjusted.
Statusebene
Technikerebene
Herstellerebene
Übersicht
Party-Funktion Shows if the party function is enabled
(EVU-Abschaltung) Shows if the energy supply utility shut down is enabled; only
available with double tariff control and when the surge current
cut off is enabled.
Raumtemperatur Current room temperature (measured by the gauge in the ana-
logue room operating panel or in the external gauge housing).
Temp. Boiler Unten Domestic water temperature in the lower region of the storage
tank.
Temp. Boiler Mitte Domestic water temperature in the middle region of the storage
tank.
Temp. Verdampf.block Current temperature in the heat pump's evaporator block.
Heizen Stufe 1 If the room thermostat requests “heating level 1”, 'YES' appears
here. If no cut-off is enabled (DW priority), the supply air is
heated in the aerosmart.
Heizen Stufe 2 If the room thermostat requests “heating level 2”, 'YES' appears
here. The external room heating is also enabled (start-up and
shut-down delays apply for pellet stoves)
Verdichter Current status of the compressor
MV - Fluessig Current status of the liquid solenoid valve
MV – Heissgas Current status of the hot gas solenoid valve
MV – Luft Current status of the solenoid valve for the air capacitor
Zusatzheizung Current status of the top-up heater in the room