DResearch Hydra IP MR Series, Руководство по настройке системы, Страница: 13 / 29

DResearch GmbH – Configuration of the Hydra
IP
analogue DVR 2011-02-02
13
2.3 Creating a configuration for multiple systems (fleet configuration)
NOTE:
It is possible to configure multiple systems with the same configuration parameters through the
fleet configuration option. Be aware that a uniform configuration can only be applied to systems of
the same device type. Should you have different systems installed in your vehicle fleet (e.g.
MR3060-6 and MR3080-8), there has to be a separate fleet configuration created for every device
type.
To create a configuration that is to be installed on all DVRs of a vehicle fleet, you have to apply a fleet
configuration. Default configurations or other DVR configurations are available as a basis. Take the
following steps (the depiction of the screenshots follows – these are marked with step-IDs):
Step Description
1
Choose the configuration that will be loaded to the DVR. This can be any configuration set
(Original, Editing, Release) from any DVR, of which its configuration has been saved to the USB
flash drive and appears in the overview. Alternatively, a default configuration can be selected.
Please take notice, that there has to be a separate fleet configuration for every system type. If
you are using, for example, the MR3060-6 and MR3080-8 within a vehicle fleet, each of these
systems has to have its own fleet configuration created.
2
Create an editable set by activating the fleet configuration button.
3
The new set can now be opened for editing – activate therefore the edit button and select the set
Editing from the menu – the set will then open in editing modus and the parameters can now be
changed and saved. (See instructions in chapter 3)
4
After completing the modification process, the set Editing has to be made public, by generating
the set Release. For this, you have to click on the release button.
The configuration is now prepared for upload to the DVR. The fleet update can be initiated by
connecting the configuration stick to all DVRs of the fleet and thus transferring the configuration
set per upload unto all devices.
Selection of any configuration, followed by creating
the
set Editing on the configuration (fleet
configuration, globalConfig)
1