DREAVER DESK BIKE, Руководство пользователя, Страница: 5 / 12

2. Installing the stabilizers
» Place the trainer upside down.
Mount the front and rear
stabilizers on the bottom on the
trainer with two pairs of screws.
3. Installing/replacing the battery
» Remove the display by disconnecting it from it’s slot. The
battery compartment is situated behind the counter. Install
or replace a 1.5V AAA battery. Re-assemble the display.
OPERATIONS
» Press the red button to turn on the display. You can select the desired function by pressing
the red button. Refer to the right upper corner of the display for functions.
» TIME Total time pedalled.
» DISTANCE Total distance pedalled.
» COUNT Total movement times during the workout session.
» TOTAL COUNT Total movement times during different sessions.
This value cannot be reset unless you replace the battery.
» CALS Total calories burned.
IMPORTANT:
The calculation of calories burned is an estimation and should not be considered
medically reliable. We suggest consulting your doctor or dietician to adapt your diet and energy
consumption depending on your physical condition, and the sporting activities you intend to be
involved in. We also recommend that you consult your doctor prior to beginning any new exercise.
Notes:
The functions change automatically after a couple of seconds so that during your session
you can keep track of the tie, distance, number of exercises and the total estimated calorie
consumption. If you prefer one particular function, then press the red button till you have found the
desired function and “SCAN” is off the display.
The display will automatically switch on when you start exercising or when you press the red button.
The display will automatically switch off when the trainer is not in use for more than 4 minutes.
Reset the exercising data by pressing the red button for 3 to 5 seconds.
English
2
3
DREAVER - DESK BIKE
3