DREAMVISION Star Light R699780, Руководство пользователя

Страница: 29 / 48

6.0 MENU AND PICTURE SETTING
R699780 - Starlight User Manual 29
• Vertical Blue (1 to 5)
Installation Style
Flip the image to the left or right, up or down according to the projection state of the projector:
Front, Ceiling Mount (F), Rear or RearCeiling mount (R)
Keystone
Compensate for trapezoidal distortion caused by installation. Independently to the screen orientation, make sure
that the projector is not tilt more than 5% left/right and 15% up/down.
Screen Adjust
This setting corrects the color balance derived from the reflective characteristics of the screen without altering the
global picture settings. You may select:
• Off: No modification
• Mode A: slightly reddish
• Mode B: slightly greenish
• Mode C: slightly bluish
6.5 Display Setup Menu
Back Color
Configures the screen color displayed when there is no active input. Set to Blue or Black.
Menu Position
Upper left, Upper right, Center, Lower right, Lower left.
Menu Display
15sec: Display menu for 15 seconds before fade out.
On: Always display menu.
Line Display
5sec: Display the input settings for 5 seconds after input selection.
Off: Don’t display
Source Display
On: Display the source of the input signals after input. selection
Off: Don’t display.
Logo
On: Display logo during startup for 5 seconds.
Off: Don’t display.
Language
Choose the OSD language between: English, Japanese, German, Spanish, Italian, French, Portuguese, Dutch,
Swedish, Norvegian, Russian and Chinese.
6.6 Function Menu
Lamp Power
The Lamp Output function is used to configure the light output of the lamp. Select Normal to set the lamp to 150W
or High, 200W. To avoid any damage to the lamp, you can’t changed the lamp power within 90 seconds from the
projector startup or 60 seconds after lamp power change.
Trigger
The 12V trigger output can be used to control any 12V remoted compatible devices such as motorized screens or
anamorphic kits: The 12V trigger output is 12Vcc, 100mA. Select the trigger output behavior:
• Off: 12V trigger voltage state is always low.
• On (power):12V trigger state is high when the projector is powered ON.
• On(V-Stretch): 12V trigger is high only when V-Stretch is active. To be used with Anamorphic kits or 2.35
motorized screen.