1.0 GETTING STARTED
R699751 - DreamScaler3 User Manual
7
•
Avoid excessive humidity, sudden temperature changes or temperature extremes.
•
Use only accessories recommended by the manufacturer to avoid fire, shock or other hazards.
•
Unplug your DreamScaler3 before cleaning. Use a damp cloth for cleaning.
Don’t ...
•
Install the DreamScaler3 on an unstable surface or one that is unable to support all four of its feet, unless it is
installed in an equipment rack.
•
Stack the DreamScaler3 directly above heat-producing equipment such as power amplifiers or other
components that generate heat during use.
•
Expose the DreamScaler3 to a high temperatures, humidity, steam, smoke, dampness, or excessive dust. Avoid
installing the DreamScaler3 near radiators and other heat producing appliances.
•
Install the DreamScaler3 near unshielded TV or FM antennas, cable TV decoders, and other RF-emitting
devices that might cause interference.
•
Place the DreamScaler3 on a thick rug or carpet or cover the DreamScaler3 with cloth. This might prevent
proper cooling.
•
Attempt to service this unit. Instead, disconnect it and contact your Authorized DreamVision Reseller.
•
Open or remove unit panels or make any adjustments not described in this manual. Attempting to do so could
expose you to dangerous electrical shock or other hazards. It may also cause damage to your DreamScaler3.
•
Obstruct the front panel IR receiver window shown in “Remote Control Overview”. Do not attempt to use the
remote control out of line of sight with the IR receiver. Doing so will cause improper operation.