ASSEMBLY
6 of 8
Construct the slat frame as follows:
1) Bolt head/foot bars 10 to the
centre bar 12 using screws G,
washers C and nuts P as shown.
2) Secure the side bars 11 by
threading screws G into the
corresponding holes in the
head/foot bars 10. tighten, using
Allen key S.
1) Fit the mattress support rails V
to
the slat frame. Secure with
screws H and nuts O. Tighten
with a spanner.
2) Fit the slats to the slat frame by:
a)Pushing the end caps into the
holes in both side bars 11.
b) One by one, slot each slat into
the end caps at either side first.
c) Slot a slat from each side into
a centre cap.
d) Finally, carefully push the centre
cap, with both slats fitted into the
holes in the centre bar.
P
STEP 5
STEP 6
