© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Product Maintenance
To maximize the life of your door, it is important to regularly inspect
the glass and other hardware for misalignment, proper attachment,
and/or damage. Contact DreamLine
®
with any questions or concerns.
NOTE
BASES and BACKWALLS
: To ensure long lasting life for your acrylic back walls: wipe them off
after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream
based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal
brushes or scrapers that could permanently scratch or dull the surface.
GLASS
: To ensure long lasting life for your glass shower products: wipe them off after each use
with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent
soap buildup and water spots (Hard water can etch the surface of the glass over time if left to dry).
To prevent scratching the surface: never use abrasive cleaners or cleaning products that contain
scouring agents. Never use bristle brushes or abrasive sponges that may scratch the surface of the
glass.
HARDWARE
: To ensure a long lasting finish: wipe off all metal parts after each use with a soft
cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If
accidentally used, rinse the surface as soon as possible to prevent damage to the finish (peeling or
corrosion). After cleaning the polished finishes, rinse thoroughly and wipe dry with a soft clean-
cloth.
Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or polish
to stainless steel hardware, work with the grain (not across the grain). Never use an abrasive
sponge or cloth, steel wool or wired brush as these may permanently scratch the surfaces.
UNIDOOR MADRID Shower Door and Inline Panel Manual Ver 1 122019
37
©2019 DreamLine® All Rights Reserved
UNIDOOR MADRID Maintenance Checklist
◻
Check that the unit is stable, operates smoothly and that the installation is secure
◻
Confirm that all screws are tight
◻
Confirm that all vinyl seals are intact (replace if missing or damaged to prevent water leakage)
◻
Inspect exposed and concealed glass edges for damage
◻
Damaged Glass Must be Replaced
◻
Inspect silicone for gaps. Remove and replace silicone as necessary to prevent water leakage.
