© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
©2018 DreamLine. All Rights Reserved
QUATRA PLUS Shower Enclosure Manual Ver 1 10/2018
!
IMPORTANT STEPS TO FOLLOW:
◻
Use 100% silicone caulk -
a
quick-drying or fast-curing silicone is
recommended for the installation of hinge panel glass into the U-Channel
◻
Apply enough silicone into the U-Channels to secure the panel glass
◻
Fully tighten the L-Bars™ on the Hinge Panel Glass and the Buttress
Return Panel
◻
DO NOT remove the spacers or shims from beneath the door
glass for at least 24 hours to allow the silicone to fully cure in the
U-Channel holding the hinge panel glass
◻
The hinge panel glass for this model should not be adjusted
more than 1/4” within the U-Channel for an out-of-plumb wall
condition
◻ Refer to the product installation manual for more details
24
Hours
The hinge panel glass must be properly installed and secured to support the
weight of the door glass. Failure to follow these steps may result in the hinge
panel glass pulling out of the U-Channel.
!
100% Silicone
!
NOTE: Leave spacers or shims in place beneath the door glass for 24 hours.
If time allows, delay installing the door glass onto the hinge panel glass for
24 hours until the silicone securing the hinge panel glass has fully cured.
