Dream 2655PIA-DK, Быстрое руководство

Страница: 8 / 19

2655PIA-DK_Rev0 – User’s Manual
2655PIA-DK Users Manual - Rev. 03/13
8
© 2013 Dream S.A.S.
Advanced
Functions
Some advanced functions can be configured by pressing repetitively on the “Set” button until the display shows
“
F n c ”.
Then following functions can be adjusted:
Lower Octave Shift:
Octave shift of the lower sound.
- Press the first ”Instrument select” button. Display toggles between “ L.O.S " and “ 1 ”. Use “Plus” and “Minus”
buttons to select the octave shift in range (0-2)..
Damper Pedal Assign:
Damper pedal can be assigned to Upper sound or lower sound or to both.
- Press the second ”Instrument select” button. Display toggles between “ d.P d " and “ L _ U ”. It means that
Damper pedal is assigned to Upper and Lower sounds.
- Use “Plus” and “Minus” buttons to select “ _ U ” (Damper pedal assigned only for Upper sound) or “ L _ ”
(Damper pedal assigned only for lower sound).
Temperament:
Various historical temperaments other than the modern “equal ” can be selected.
- Press the third ”Instrument select” button. Display toggles between “ t M P " and “ T P.1 ”. It means that
temperament #1 is currently selected.
- Use “Plus” and “Minus” buttons to select another temperament through the 7 available.
Available temperaments are:
o
TP.1: Equal
o
TP.2: Pythagorean
o
TP.3: Pure Major
o
TP.4: Pure Minor
o
TP.5: Mean Tone
o
TP.6: Werckmeister III
o
TP.7: Kirnberger III
Root Note:
Root note should be specified for temperaments others than the Equal one.
- Press the fourth ”Instrument select” button. Display toggles between “ r t.n " and “ C ”. It means that root note
for is currently selected temperament is C.
- Use “Plus” and “Minus” buttons to select another root note. “ C ‘ “ in display
Mike setting:
Mike can be connected on mike input
- Press the fifth ”Instrument select” button. Display shows“ M i c ” on the LED display.
- Then press “Plus” button to put the mike input On with low reverb level. Display will be “ M.i c ”.
- Pressing again “Plus” button again will increase the reverb level and display will be “ M.i.c ”, then “ M.i.c. ”.