2655PIA-DK_Rev0 – User’s Manual
2655PIA-DK Users Manual - Rev. 03/13
4
© 2013 Dream S.A.S.
Touch Curve:
Soft / Medium / Hard / Constant Velocity (default = 64)
Touch curve can be selected for each instrument
-
Press the “Touch Curve” button. The “Touch Curve” LED will turn on. Default value for current selected
instrument will be displayed: “
S F t
” message for Soft curve, “
M E d
” for Medium curve, “
H r d
” for Hard curve
and “
C S t
” for Constant curve
-
Press the “Touch Curve” button again for exit.
The value for the constant velocity can be set:
-
While constant curve is selected, hold the “Touch Curve“ button pressed until the display shows the current
constant dynamic value.
-
Use the “Plus“ and “Minus” buttons for adjusting the constant dynamic in the range 0-127
Demo:
Press “Demo”, then press “Instrument Select” button 1, 2 or 3.
Metronome:
The metronome signature can be set. Follow the steps below:
-
Hold the “Metronome“ button”
-
Use the “Plus“ and “Minus” buttons for choosing the signature.
Available signatures are 1/4, 2/4, 3/4, 4/4, 5/4, 6/8, 12/8
-
Press “Set” button to display metronome volume. Metronome volume can be adjusted from “1” to “20” with the
“Plus“ and “Minus” buttons.
Sequencer
A 4-track, 3-song sequencer is implemented in 2655PIA-DK. Sequencer functions are handled with
“
Rec Mode”,
“Play/Rec Start”, “Track A”, “Track B” and “Set” buttons.
Rec Mode:
-
Should be pressed before starting a track record. Then, track to be recorded can be selected.
-
Allow to stop the track record.
Play/Rec Start:
-
Start playing the selected recorded song
-
Stop playing the selected recorded song
Track A:
-
Select the track to record if even track
-
Mute/demute even track of the selected track pair
Track B:
-
Select the track to record if odd track
-
Mute/demute odd track of the selected track pair
Set:
-
Access to “Song select” and “Track pair select”. Displayed values can be changed with “Plus” and “Minus”
buttons.
