www.dreamonme.com/help
8
Bolt 1-3/4” (×1)
A
Bolt 1” (×1)
B
Wooden Dowel
1-1/8” (×6)
C
Curve Washer
(×1)
D
(3)
(B)
(A)
(A,D)
(D)
(3)
(C)
(5)
(7)
(8)
(8)
(9)
(9)
(10)
(10)
(3)
1
DRESSER ASSEMBLY - DRESSER FRAME ASSEMBLY
1a. Place the Dresser Bottom
Rear Panel (7) on a soft
surface and align Dresser
Center Panel (3) as shown in
illustration. Attach both using
two Wooden Dowels (C).
1b. Attach the Dresser Top Rear
Rail (5) to the Center Panel
(3) using a Wooden Dowel (C)
at the bottom top end of the
Center Panel.
1c. Similarly, attach the Dresser
Top Front Rail (8), both
Dresser Center Rails (9), and
Dresser Bottom Front Rail
(10) to the Center Panel (3)
using Wooden Dowels (C).
1d. Insert the Curve Washer (D)
into the Bolt (A) and insert
the same into the insertion
present near Dresser Bottom
Front Rail (10) to the Center
Panel (3) and tighten it.
1e. Insert the Bolt (B) into the
middle insertion present at
the Bottom Rear Panel (7)
from below.
