www.dreamonme.com/help
16
NOTE:
Model shown is example only,
Styles may vary
9a.
Determine the desired location of the
dresser. Find a wall stud behind the
furniture piece and position one of
the Brackets (J) vertically on the stud
approximately 1" below the top of
the dresser piece. Mark and drill a
pilot hole in the center of the stud
with a 3/32" drill bit. Attach the
Bracket (J) to stud with the two
Screws (L).
9b.
The second bracket will need to be
attached horizontally to the top of
the dresser frame. Temporarily move
the dresser away from the wall and
place a bracket near the top of the
frame. Mark and drill holes for
screws with a 3/32" drill bit. Attach
the bracket to the dresser piece with
the two Screws (M).
9c.
Move the dresser piece into its final
position, taking care to line up the
wall bracket with the dresser
bracket. Thread the strap through
the brackets as shown in the
illustrations. Tighten the strap until
snug. Note: Do not overtighten.
Similarly, follow the steps for the
other side of the furniture.
9
ANTI-TIP SAFETY HARDWARE INSTALLATION
WALL
WALL
WALL
WALL
WALL
FURNITURE
FURNITURE
FURNITURE
FURNITURE
(L)
(M)
(J)
(K)
(K)
FURNITURE
WALL
“Pull Down To Tighten”
“Insert”
“Insert”
1
2
3
