background image

      

2

WARNING !

  

· FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS 

  COULD RESULT IN SERIOUS INJURY OR DEATH.

· READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS 

  FOR FUTURE USE.

· UPON COMPLETION OF ASSEMBLY, MAKE SURE ALL SCREWS,BOLTS AND 

  FASTENERS HAVE BEEN SECURELY TIGHTENED.

  A FREQUENT AND PEDRIODICALLY CHECK SHOULD BE MADE TO CONFIRM ALL

  THE SCREWS AND NUTS REMAIN TIGHT.

· NEVER USE THIS PRODUCT IF THERE ARE ANY LOOSE, MISSING FASTENERS,

  LOOSE JOINTS,BROKEN PARTS, OR TORN MESH/FABRIC.CONTACT DREAM ON ME

 

 

1532 S WASHINGTON AVE PISCATAWAY TOWNSHIP, NJ 08854 732-752-7220

 FOR

  REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE IF NEEDED.

· NEVER SUBSTITUTE PARTS, THE PRODUCT INCLUDING SIDE RAILS,MUST BE 

  FULLY ERECTED PRIOR TO USE.

· NEVER USE BED FOR INFANTS, THIS TODDLER BED IS NOT A SUBSITITUTE FOR A 

  CRIB,THE TODDLER BED IS USED FOR A CHILD BETWEEN THE AGE OF 15MONTHS

  TO 5 YEARS WITH A MAXIMUM WEIGHT OF 50 POUNDS(22.7KG).

· NEVER USE PLASTIC SHIPPING BAGOR OTHER PLASTIC FILM AS A MATTRESS

  COVERS NOT SOLD AND INTENDED FOR THAT PURPOSE,THEY CAN CAUSE

  SUFFOCATION.

· CAUTION ENTRAPMENT HAZARD:TO AVOID DANGEROUS GAPS,ANY MATTRESS 

  USED IN THIS BED SHALL BE FULL SIZE CRIB MATTRESS AT LEAST 51-58IN

  (1310MM) IN LENGTH, 27-1/4IN(690MM) IN WIDTH AND 4IN(100M) IN THICKNESS,OR

  GREATER,BUT NOT EXCEED 5IN.

· NEVER USE A WATER MATTRESS WITH THIS TODDLER BED.

· WARNING STRANGULATION HAZARD:STRINGS CAN CAUSE STRANGULATION! 

  NEVER PLACE BED NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES 

  MAY STRANGLE A CHILD.NEVER SUSPEND STRINGS OVER BED.   

  NEVER PLACE ITEMS WITH A STRING CORD,OR RIBBON,SUCH AS HOOD STRINGS,

  PACIFIER CORDS AOUND A CHILS’S NECK.THESES ITEMS MAY CATCH ON BED 

  PARTS.

· WARNING: INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.

  OPENINGS IN AND BETWEEN BED PARTS CAN ENTRAP HEAD AND NECK OF A 

  SMALL CHILD. NEVER USE BED WITH CHILDREN UNDER 15MONTHS.ALWAYS 

  FOLLOW THE ASSEMBLY INSTRUCTIONS.

· TO REDUCE THE RISK OF SIDS,PEDIASTRICIANS RECOMMED HEALTHY INFANTS

  BE PLACED ON THEIRE BACK TO SLEEP,OR ADVISED BY YOUR PHYSICIAN.

· DO NOT USE BED IF THE SPACE BETWEEN BED AND SOLID OBJECTS IS LESS 

  THAN 12IN(31CM), A CHILD COULD SLID INTO THE SPACE AND SUFFOCATE.

· IF REFINISHING,USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.

  TO WASH,CLEAN WITH MILD SOAP AND DAMP CLOTH. 

  TO STORE,PLEASE KEEP IN A COOL PLACE.

 

                                                                                                                   MADE IN CHINA

 

Содержание 653










Отзывы: