© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
15
PRISM PLUS with Buttress Shower enclosure manual Ver 1 10/2018
©2018 DreamLine. All Rights Reserved
or
door glass
3
2
1
4
5
Fig 11
Fig 12
NOTE:
Dry-fit the strike vinyl
between the door glass and the
buttress wall for proper spacing
and alignment.
!
1/4”
max
12.
Remove the
Buttress Return Panel Glass (#04)
and the
U-Channel (34”) (#03).
Place the
U-Channel (34”) (#03)
against the plumb line on the wall and mark the holes for drilling through the
pre-drilled holes. Drill the holes using a
Ø5/16”
drill bit and insert the
Wall Anchors (#14).
Apply a bead
of silicone behind the U-Channel and attach it to the wall using the
ST4.2×40 Pan Head screws (#13)
.
(
Fig 12)
11.
Attach the
U-Channel (34”) (#03)
to the
Buttress Return Panel Glass (#04)
and dry-fit the glass
onto the buttress wall. and align with the
Door Glass (#06).
Adjust for level and plumb. If necessary, the
Buttress Return Panel Glass (#04)
can be pulled out of the U-channel
1/4” max.
to align flush with the
end of the buttress wall.
Do not exceed this tolerance!
Dry-fit the
135°
Strike Vinyl w/VHB Tape (#05) (
without removing the VHB tape) to gauge the proper
space between the
Door Glass (#06),
the buttress wall and the
Buttress Return Panel Glass (#04)
.
Use a level to plumb the
U-Channel (34”) (#03)
against the wall. Mark the u-channel position on the
wall and the top and face of the buttress wall along the edge of the glass. (
Fig 11)
