© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
11
PRISM PLUS with Buttress Shower enclosure manual Ver 1 07/2018
©2018 DreamLine. All Rights Reserved
8
7
Max 3/16”
(4mm)
Max 3/16”
(4mm)
5
6
2
3
1
Ø5/16"
(8mm)
4
Fig 6
Fig 7
(Left-hand L-Bar
™
installation shown)
Adjust the angle of the L-Bar™ (up to 3/16”)
using the small set screws on the wall plate.
!
NOTE:
When marking the L-Bar™ location on the wall, leave the Decorative Cover
attached to allow space to re-attach the Decorative Cover after installation.
7.
Attach the
Wall Plate (#9.6)
to the wall using the
ST4.2 x 40 Truss Head
screws (#9.7)
.
Re-attach the
L-Bar™ (#9.3)
to the
Wall Plate (#9.6)
using the
M5x14 (Flat Head Screw#9.8)
Adjust
the angle if necessary by using the
Wall Plate Adjustment Set Screws (#9.9). (
Fig 7)
6.
Position the
Left-hand L-Bar™ (#9)
onto the
Hinge Panel Glass
(#02)
as shown and mark its
position on the wall. Remove the
Wall Plate (#9.6)
from the
Left-hand
L-Bar™ (#9).
Hold the
Wall
Plate (#9.6)
to the marks on the wall. Hold the
Wall Plate (#9.6)
level and mark the holes for drilling
through the wider, untapped holes.
(Fig 8.2)
Drill two
Ø5/16”(8mm) holes
and insert the
Ø5/16”
Wall anchors (#9.5)
.
(Fig 6)
