http://dreamcatcher.asia/cw
ME1110 Digital Modulation Technique
Quick Start Guide - 8/16
Step 3: Displaying the Modulated IQ Signals in the 89601 VSA Software
Connect the RF out signal to the
oscilloscope
’s channel 1 through the
BNC-to-SMA cable.
Use an USB cable to connect a PC to
the oscilloscope.
Note:
The 89601 VSA software should
be preinstalled in the PC.
Set the oscilloscope to interface with
the 89601 VSA software. (Via the USB
port)
Instructions Keystrokes
Set the
Input/Output
controller
Press
[Utility]
, followed
by
{I/O}
. The Current
I/O Configuration dialog
box is displayed.
Select the
USBinterface
in the 89600
VSA software
Press
{Control}
and
turn the Entry Knob
to USB. Press
{Control}
again to
select or activate the
USB controller.
*{ }= sofkey, [ ] = hardkey
To verify the oscilloscope connection,
select
All Programs > Agilent
Connection Expert
.
1
2
1
2
3
3
4
4
