The controls are:
DEPTH: Modulation amount
SPD:
Modulation speed
WIDTH: When this is at 0, the effect is MONO. As you advance to 100 the left and right channels are split
and a stereo effect is produced. At 100, both left and right channels have a 180 degree inverted modulation.
FEED:
Feedback of the effect
MIX:
Dry/wet balance. This parameter is global for all 3 algorithms
7.3 FX3: Reflections (Delay, Ping pong, Reverb)
FX3 is dedicated to delay and reverb effects and include:
- Delay (a stereo delay that can have different delay times on each channel)
- Ping pong delay
- Reverb (a huge, lush reverb)
All three share two common controls, that are governed from slider 4 to 5:
DAMP:
A filter is added to the feedback loop of the effect. Minus values set a low pass filter and
positive a High Pass one
MIX:
Dry/wet balance. This parameter is global for all 3 algorithms
The 3 first controls for the Delay are:
L:
Left channel delay time
R:
Right channel delay time
FEED:
Amount of repeats
For the Ping Pong:
TIME:
Delay time
EMPTY: This control does nothing
FEED:
Amount of repeats
For the Reverb:
PRE:
Pre Delay time. A faint buzzing noise may be heard when changing values while the reverb is active
SIZE:
Room size
FEED:
Decay time
8. Other settings
The right-most page “SET” allows access to the following settings:
GLIDE:
Portamento rate
TRK:
Filter key track
VCO:
Both VCO1 and 2 levels. This will attenuate the waveform that is produced from
the Wave control
LEGATO button: Legato On or Off (will affect portamento and envelope re-trigger)
12
Содержание TYPHON
Страница 1: ...USER S MANUAL...
Страница 4: ...1 3 Block Diagram 4...
