Dreadbox Nyx V2, Руководство пользователя

Страница: 5 / 14

The Dual Filter
Filter Controls:
1. CUTOFF knob - sets the Cutoff frequency of both filters
2. RES knob - controls the amount of resonance (sometimes
referred as Q) to the filter cutoff frequency
3. OFFSET knob - sets the Cutoff difference of the second fil-
ter. Normally is set at 50%
4. MOD ROUTE
OFF: No Modulator (MOD) controls the Filter
1/2 : MOD1 controls Filter1
MOD2 controls Filter2
1+2 : Both Modulators control both Filters
1 : Only MOD1 controls the Filter
About the Dual Filter
The Nyx V2 Synthesizer, is equipped with 2 pre-fed Filters, each at 12dB/oct. You can achieve various
Filter combinations, from a Classic 24dB/oct Low Pass or even a variable width Band Pass.
Please refer to the “ROUTING” for more info.
The Modulators
Nyx V2 offers 3 Digital Modulators/
Envelopes. MOD1, MOD2 and the AMP
modulator.
When on Envelope mode, each time a
MIDI note is ON or a Gate is triggered,
the Envelopes will start doing their cycle.
When on LFO or Drone (for the AMP) Mode, the Modulators function as Cycling Envelopes.
Having both Rise and Fall at 0% and Hold at a decent amount, will
result in a constant high, but with short “off” bursts.
5
Rise stands for the Attack time
Fall is the Decay and Realease time
Hold is the Sustain Level
Rise is the rise time
Fall is the fall time
Hold is the time that is left on a high state
ENVELOPE
LEVEL
NOTE ON
NOTE OFF