-
11
-
Figure 6
2.4
ELECTRICAL INSTALLATION
2.4.1
GENERAL INFORMATION FOR ELECTRICAL INSTALLATION
Execute the connection as indicated in the wiring diagram. Factory connection must not be changed!
(Figure 8). In the electric wiring cabinet remove the partition corresponding with the input wire diameter
of
Ø
8 or
Ø
10 (Figure 7). The degree of protection of electric parts of the heater is IP 44. Power input of electric
element is 3x2200 W.
Use pre
-
installed brackets to hold the lead cable.
Figure 7
Ø10
Ø8
Ø8
Ø10
