Draytek VigorSwitch P1280, Руководство пользователя, Страница: 26 / 120

VigorSwitch P1280 User’s Guide 20
I
I
I
I
-
-
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
General setup is used to configure settings for the switch network interface and offers how
the switch connects to a remote server to get services.
I
I
I
I
-
-
1
1
-
-
1
1
I
I
P
P
A
A
d
d
d
d
r
r
e
e
s
s
s
s
Use the IP Address screen to configure the switch IP address and the default gateway device.
The gateway field specifies the IP address of the gateway (next hop) for outgoing traffic.
The switch needs an IP address for it to be managed over the network. The factory default IP
address is 192.168.1.224. The subnet mask specifies the network number portion of an IP
address. The factory default subnet mask is 255.255.255.0.
Info If VigorSwitch has connected to Vigor router, it will use the IP address obtained from
the DHCP server on Vigor router. Thus, the user must type the assigned IP as URL for
accessing into the web user interface of VigorSwitch. If not, 192.168.1.224 shall be
the default IP.
Available settings are explained as follows:
Item Description
Mode Select the mode of network connection.
Static- Use static IPv4 address.
DHCP – Use DHCP provisioned IP address and Gateway if
feasible.
IP Address It is available when Static is selected as Mode.
Enter the IP address of your switch in dotted decimal notation
for example 192.168.1.224. If static mode is enabled, enter IP
address in this field.
Subnet Mask It is available when Static is selected as Mode.
Enter the IP subnet mask of your switch in dotted decimal