VigorSwitch G2080 User’s Guide
84
end of a link is strongly recommended. Please also note that low speed links will stay in
“not ready” state when using static trunk to aggregate with high speed links.
As to system restrictions about the port aggregation function on the switch, in the
management point of view, the switch supports maximum 8 trunk groups for LACP and
additional 8 trunk groups for Static Trunk. But in the system capability view, only 8 “real
trunked” groups are supported. An LACP trunk group with more than one ready
member-pors is a “real trunked” group. An LACP trunk group with only one or less than
one ready member-port is not a “real trunked” group. Any Static trunk group is a “real
trunked” group.
Per Trunking Group supports a maximum of 12 ready member-ports. Please note that some
decisions will automatically be made by the system while you are configuring your
trunking ports. Some configuration examples are listed below:
a)
12 ports have already used Static Trunk Group ID 1, the 13th port willing to use the
same Static Trunk Group ID will be automatically set to use the “None” trunking
method and its Group ID will turn to 0. This means the port won’t aggregate with other
ports.
b)
14 ports all use LACP Trunk Group ID 1 at most 12 ports can aggregate together and
transit into the ready state.
c)
A port using the “None“ trunking method or Group ID 0 will be automatically set to
use the “None” trunking method with Group ID 0.
2
2
.
.
1
1
5
5
.
.
1
1
P
P
o
o
r
r
t
t
S
S
e
e
t
t
t
t
i
i
n
n
g
g
/
/
S
S
t
t
a
a
t
t
u
u
s
s
Function name:
Port Setting/Status
Function description:
Port setting/status is used to configure the trunk property of each and every port in the
switch system.
Parameter description:
Method:
This determines the method a port uses to aggregate with
other ports.
None -
A port does not want to aggregate with any other port
should choose this default setting.
LACP -
A port use LACP as its trunk method to get
aggregated with other ports also using LACP.
Static -
A port use Static Trunk as its trunk method to get
aggregated with other ports also using Static Trunk.
Group:
Ports choosing the same trunking method other than “None”
must be assigned a unique Group number (i.e. Group ID,
valid value is from 1 to 8) in order to declare that they wish
to aggregate with each other.
Active LACP:
This field is only referenced when a port’s trunking method
is LACP.
Activer -
An Active LACP port begins to send LACPDU to
its link partner right after LACP protocol entity started to
take control of this port.
Содержание VigorSwitch G2080
