Draytek VigorAP 810, Руководство пользователя

Страница: 72 / 134

VigorAP 810 User’s Guide 62
Phy Mode HTMIX (11b/g/n mixed mode) is specified VigorAP 810.
Security Select WEP, TKIP or AES as the encryption algorithm. Type
the key number if required. Or click
Disabled to ignore such
feature.
Peer Mac Address Type the peer MAC address for the access point that VigorAP
810 connects to.
Packet-OVERDRIVE This feature can enhance the performance in data
transmission about 40%* more (by checking
Tx Burs t). It is
active only when both sides of Access Point and Station (in
wireless client) invoke this function at the same time. That is,
the wireless client must support this feature and invoke the
function, too.
Note: Vigor N61 wireless adapter supports this function.
Therefore, you can use and install it into your PC for
matching with Packet-OVERDRIVE (refer to the following
picture of Vigor N61 wireless utility window, choose
Enable
for TxBURST on the tab of Option ).
Antenna VigorAP 810 can be attached with two antennas to have good
data transmission via wireless connection. However, if you
have only one antenna attached, please choose 1T1R.
Tx Power The default setting is the maximum (100%). Lower down the
value may degrade range and throughput of wireless.
Channel Width
20 MHZ- the router will use 20Mhz for data transmission and
receiving between the AP and the stations.
Auto 20/40 MHZ– the router will use 20Mhz or 40Mhz for
data transmission and receiving according to the station
capability. Such channel can increase the performance for