Draytek Vigor3300V+, Руководство пользователя

Страница: 98 / 230

Vig Series User’s Guide 90
4.1.3 Syslog
The Vig Series supports a Syslog function to keep a record of abnormal conditions.
The router will send Syslog packets to a Syslog server on the remote site. The administrator
can observe any abnormal events from the router. Open
System >> Syslog . The Syslog web
page is shown below:
Disable/Enable Click Enable to activate this function. The router will send system
log message for your reference. If you click Disable , the router
will not send out any message about system log.
Syslog Server IP The IP address of the Syslog server. If a user assigns an IP address
of “0.0.0.0”, the Syslog function will be disabled. Then, the router
will not send Syslog packets to the Syslog server.
Syslog Server Port Type a port for the Syslog protocol.
Firewall Log Check this box to record the firewall log.
VPN Log Check this box to record the VPN application log.
User Access Log Check this box to record the user access log. Such information will
be seen in Syslog server.
Call Log Check this box to record the VoIP/ISDN phone log.
WAN Log Check this box to record the connection status log for WAN
interface.
Syslog Facility When Vig runs VoIP program for dialing VoIP phone
calls, information about VoIP starting, restarting, registered,
crashed, and etc., will be created at the same time. Such
information will be useful for the administrator to understand the
running status of VoIP function and will be helpful for the
administrator to solve the problems encountered.
Syslog protocol usually will classify messages into several levels
(facilities) based on the service types. Each facility (Local use0 ~
Local use7) possesses items and services used generally. The
administrator can specify any one of the facilities used for VoIP
function. Such function can assist the administrator to identify
which log containing VoIP information.