Draytek Vigor2850 Series, Руководство пользователя

Страница: 288 / 387

Vigor2850 Series User’s Guide
278
Item Description
Mode
Choose the mode for WDS setting.
Disable
mode will not
invoke any WDS setting.
Bridge
mode is designed to fulfill
the first type of application.
Repeater
mode is for the
second one.
Security
There are three types for security,
Disable
,
WEP
and
Pre-shared key
. The setting you choose here will make the
following WEP or Pre-shared key field valid or not. Choose
one of the types for the router.
WEP
Check this box to use the same key set in
Security Settings
page. If you did not set any key in
Security Settings
page,
this check box will be dimmed.
Pre-shared Key
Type –
There are some types for you to choose.
WPA
and
WPA2
are used for WDS devices (e.g.2920n wireless
router, you can set the encryption mode as WPA or WPA2
to establish your WDS system between AP and the router.
Key -
Type 8 ~ 63 ASCII characters or 64 hexadecimal
digits leading by “0x”.
Bridge
If you choose Bridge as the connecting mode, please type in
the peer MAC address in these fields.
Four peer MAC
addresses are allowed to be entered in this page at one time.
Yet please disable the unused link to get better
performance. If you want to invoke the peer MAC address,
remember to check
Enable
box in the front of the MAC
address after typing.
Repeater
If you choose Repeater as the connecting mode, please type
in the peer MAC address in these fields. Four peer MAC
addresses are allowed to be entered in this page at one time.
Similarly, if you want to invoke the peer MAC address,
remember to check
Enable
box in the front of the MAC
address after typing.
Access Point Function
Click
Enable
to make this router serving as an access point;
click
Disable
to cancel this function.
Status
It allows user to send “hello” message to peers. Yet, it is
valid only when the peer also supports this function.