6
1.3
Front Panels, Back Panels & Side Panels
The front panel provides LED for device status. Refer to the following
table for the meaning of each feature.
Link/Act
Link/Act
Wide Area Network port status. When connected
to the broadband device, the ADSL/Cable
modem, this LED should be on.
Local Area Network port status. A steady LED
indicates a connection between computers on your
LAN. A flickering LED indicates data transmission.
100Mbps
Speed status of the WAN connection.
A steady LED indicates 100Mbps speed.
If the Link light is on and the 100 light is off,
the speed is 10Mbps.
100Mbps
Speed status of the Ethernet connection.
A steady LED indicates 100Mbps speed.
If the Link light is on and the 100 light is off,
the speed is 10Mbps.
VPN connection status. A steady LED indicates
VPN connection is up.
VPN
Printer
Printer port status. A steady LED indicates the
printer is connected.
WAN
Ethernet
1-4
Online
Online status of the Vigor2300. A steady LED
indicates the Internet access is available
Operation status of the Vigor2300. After start
up, the LED will blink once every two seconds
to indicate proper operation.
System
