Draytek Vigor 3220 SERIES, Руководство пользователя

Страница: 441 / 708

Vigor2832 Series User’s Guide 429
To set a new profile, please do the steps listed below:
1. Click the number (e.g., #1) under Index column for configuration in details.
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Name Type a name for this profile. Maximum 15 characters are
allowed.
Address Type Determine the address type for the IPv6 address.
Select Single Address if this object contains one IPv6 address
only.
Select Range Address if this object contains several IPv6s
within a range.
Select Subnet Address if this object contains one subnet for
IPv6 address.
Select Any Address if this object contains any IPv6 address.
Select Mac Address if this object contains Mac address.
Match Type Specify which type (128 Bits or 64 Bits) of address fomat for
IPv6 protocol will be used for comparison. The length of IPv6
address is composed by prefix and suffix (interface ID).
128 Bits – When it is selected, Vigor router will make the
completed comparison for IPv6 protocol based on prefix and
suffix.
Suffix 64 Bits (Interface ID) - When it is selected, Vigor
router will make the simplified comparison for IPv6 protocol
based on suffix only.
Mac Address Type the MAC address of the network card which will be
controlled.
Start IP Address Type the start IP address for Single Address type.
End IP Address Type the end IP address if the Range Address type is
selected.