Vigor2950 Series User’s Guide
45
Enable Open Ports
Check to enable this entry.
Comment
Make a name for the defined network application/service.
WAN Interface
Specify the WAN interface that will be used for this entry.
WAN IP
Such drop down list will be shown only if you have entered other
WAN IP address in
WAN IP Alias
window. Choose one of them
to apply open port configuration.
Local Computer
Enter the private IP address of the local host or click
Choose PC
to
select one.
Choose PC
Click this button and, subsequently, a window having a list of
private IP addresses of local hosts will automatically pop up. Select
the appropriate IP address of the local host in the list.
Protocol
Specify the transport layer protocol. It could be
TCP
,
UDP
, or
-----
(none) for selection.
Start Port
Specify the starting port number of the service offered by the local
host.
End Port
Specify the ending port number of the service offered by the local
host.
