Vigor2950 Series User’s Guide
27
D
D
e
e
t
t
a
a
i
i
l
l
s
s
P
P
a
a
g
g
e
e
f
f
o
o
r
r
P
P
P
P
T
T
P
P
/
/
L
L
2
2
T
T
P
P
To use
PPTP/L2TP
as the accessing protocol of the internet, please choose
Internet Access
from
WAN
menu. Then, select
PPTP/L2TP
mode for WAN2/WAN2. The following web
page will be shown.
PPTP/L2TP Client
Mode
Click
Enable PPTP
to enable a PPTP client to establish a tunnel
to a DSL modem on the WAN interface.
Click
Enable L2TP
to enable a L2TP client to establish a tunnel
to a DSL modem on the WAN interface.
Click
Disable
to disable PPTP/L2TP client mode. All the settings
configured in this page will be invalid.
Server
Address - Specify the IP address of the PPTP server.
Specify Gateway IP Addres
s - Specify the WAN IP address for
the router.(
這個位址設定主要是為了什麼？？
)
ISP Access Setup
Username
-Type in the username provided by ISP in this field.
Password
-Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup -
You can type in four sets of time
schedule for your request. All the schedules can be set previously
in
Application – Schedule
web page and you can use the number
that you have set in that web page.
ISDN Dial Backup
Setup
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first.
（去哪裡設定
profile
呢？）
None
- Disable the backup function.
Packet Trigger -
The backup line is not on until a packet from a
local host triggers the router to establish a connection.
This setting is available for
i
model only.
PPP Setup
PPP Authentication
- Select
PAP only
or
PAP or CHAP
for PPP.
Idle Timeout
- Set the timeout for breaking down the Internet after
passing through the time without any action. This setting is active
