Draytek Vigor 2760n, Быстрый старт

Страница: 6 / 31

Vigor2760 Series Quick Start Guide
ii
European Community Declarations
Manufacturer: DrayTek Corp.
Address:
No. 26, Fu Shing Road, HuKou, HsinChu Industrial Park, Hsin-Chu, Taiwan 303
Product: Vigor2760 Series Router
DrayTek Corp. declares that Vigor2760 Series complies with R&TTE Directive 1999/5/EEC, the
requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC, EN55022/Class B and
EN55024/Class B and Low Voltage (LVD) Directive 2006/95/EC complying with EN60950-1.
This product is designed for POTS, xDSL and 2.4GHz WLAN network for UK/Ireland. Please refer to the
web site (www.draytek.co.uk) for latest specification and compatibility for your product.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a different circuit to the the receiver.

Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired
operation.
R R F F E E x x p p o o s s u u r r e e W W a a r r n n i i n n g g
This equipment must be installed and operated in accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provided with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
`
`
C
C
a
a
u
u
t
t
i
i
o
o
n
n
Any changes or modifications not expressly approved by the grantee of this device could void the user's
authority to operate the equipment including the usage on unauthorised accessories.
Please visit http://www.draytek.com/user/SupportDLRTTECE.php#