Draytek P2261, Руководство пользователя

Страница: 40 / 234

VigorSwitch P2261 User’s Guide
32
shorthand way of representing multiple 16-bit groups of
contiguous zeros; but it can only appear once. It can also
represent a legally valid IPv4 address. . For example,
'::192.1.2.34'.
After finished the above settings, click
Apply
to save the configuration.
2
2
.
.
2
2
.
.
9
9
P
P
o
o
r
r
t
t
–
–
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
Port configuration is applied to change the setting of each port. In this configuration
function, you can set/reset the following functions. All of them are described in detail
below.
Function name:
General Setup
Function description:
It describes how to view the current port configuration and how to configure ports to
non-default settings, including Linkup/Linkdown, Speed (Current and Type), Flow Control
(Current Rx, Current Tx and Enabled), Maximum Frame Size, Excessive Collision Mode
and Power Control.
Parameter description:
Port This is the logical port number for this row.
Description It describes to configure the Port’s alias or any descriptions
for the Port Identity. It provides user to write down an
alphanumeric string describing the full name and version
identification for the system’s hardware type, software
version, and networking application
Link The current link state is displayed graphically. Green
indicates the link is up and red that it is down.
Speed Current - Provides the current link speed of the port.
Type - Set the speed and duplex of the port. In speed, if the