manualshive.com logo in svg

Draytek P2261, Руководство пользователя

Поделиться
Скачать
Draytek P2261 Скачать руководство пользователя страница 111

 

VigorSwitch P2261 User’s Guide 

103

3. Guest Voice - support a separate 'limited feature-set' voice 
service for guest users and visitors with their own IP 
Telephony handsets and other similar appliances supporting 
interactive voice services. 
4. Guest Voice Signaling (conditional) - for use in network 
topologies that require a different policy for the guest voice 
signaling than for the guest voice media. This application 
type should not be advertised if all the same network 
policies apply as those advertised in the Guest Voice 
application policy. 
5. Softphone Voice - for use by softphone applications on 
typical data centric devices, such as PCs or laptops. This 
class of endpoints frequently does not support multiple 
VLANs, if at all, and are typically configured to use an 
'untagged' VLAN or a single 'tagged' data specific VLAN. 
When a network policy is defined for use with an 'untagged' 
VLAN (see Tagged flag below), then the L2 priority field is 
ignored and only the DSCP value has relevance. 
6. Video Conferencing - for use by dedicated Video 
Conferencing equipment and other similar appliances 
supporting real-time interactive vide

o

/audio services. 

7. Streaming Video - for use by broadcast or multicast based 
video content distribution and other similar applications 
supporting streaming video services that require specific 
network policy treatment. Video applications relying on 
TCP with buffering would not be an intended use of this 
application type. 
8. Video Signaling (conditional) - for use in network 
topologies that require a separate policy for the video 
signaling than for the video media. This application type 
should not be advertised if all the same network policies 
apply as those advertised in the Video Conferencing 
application policy.

 

Tag 

Tag indicating whether the specified application type is 
using a 'tagged' or an 'untagged' VLAN. 
Untagged indicates that the device is using an untagged 
frame format and as such does not include a tag header as 
defined by IEEE 802.1Q-2003. In this case, both the VLAN 
ID and the Layer 2 priority fields are ignored and only the 
DSCP value has relevance.   
Tagged indicates that the device is using the IEEE 802.1Q 
tagged frame format, and that both the VLAN ID and the 
Layer 2 priority values are being used, as well as the DSCP 
value. The tagged format includes an additional field, 
known as the tag header. The tagged frame format also 
includes priority tagged frames as defined by IEEE 
802.1Q-2003. 

VLAN ID 

VLAN identifier (VID) for the port as defined in IEEE 
802.1Q-2003. 

L2 Priority 

L2 Priority is the Layer 2 priority to be used for the 
specified application type. L2 Priority may specify one of 

Содержание P2261











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды