Drawmer MC 3.1, Руководство пользователя

Страница: 17 / 28

1 7
MC3.1
- Monitor Controller
EXTERNAL FOOTSWITCH: An external foot or hand switch can be connected to
allow easier talkback operation. This works in parallel to the front panel switch ( )
so when either are active the talkback will operate.
TALKBACK OUTPUT: A dedicated talkback output is provided so that, as well as
being routed through the cue and the headphones, a talkback signal can be routed
to other devices at the engineers discretion. This could usually be patched into the
live-room active monitor speakers for convenience when recording acoustic
ensembles where the performers may not wish or need to wear headphones. The
output also allows for routing into a separate channel of a DAW, or other recording
facility, to allow for information overdubs to be added to a recording.
SPEAKER CALIBRATION TRIM CONTROLS
On the underside of the MC3.1 there are seven rotary controls that allow the
individual speaker level calibration of your system. Each speaker output has a
control, including the mono/sub. To alter the speaker level use a small screwdriver
to turn - counter-clockwise turns the speaker level down, and clockwise up.
For the calibration process see the “Monitor Calibration” section of this manual.
Once the system has been calibrated these trims should not be touched.
15
4