stable, safe and reliable.
3
3. Tilt of principal machine
The principal machine can be tilted at random within the range of 0-45 ° by loosing plum
blossom screws. The condensate system made of heat-resistant high-quality glass is
connected to the head of principal machine with sockets, thus making it able to tilt therewith and
continuously feed.
4. Heating water tank
Heating water tank is equipped with a closed heating tube with heating wire, and connected to
digital display of temperature, which can automatically connect or disconnect the power so as to
automatically control the water temperature inside the tank.
5. Evaporation pipe
Evaporation pipe uses PTFE, which is corrosion-resistant and can maintain a high vacuum.
6. Cooler (made of high-quality glass of thermostability, and refined)
RE-52AA Vertical, Dual-reflux.
7. Main metal components are made of corrosion-resistant high-quality stainless steel, thus
extending the service life.
III. Matters needing attention for use
1. Please read the Manual and Brief Introduction of Installing Rotary Evaporator first, and focus
on the part of installation preparation, installation procedures and operation.
2. As for the expensive solution, a simulation technology experiment should be conducted first.
Then, the solution can be normally used after confirming the equipment can meet the
experimental requirements.
3. Water temperature inside the water tank will be automatically controlled by the digital display
of temperature. Accurate water temperature will be measured directly through the mercury
thermometer.
