Section 7 -
Limit Switch Adjustments
CCW -
INCREASE TRAVEL DISTANCE
CW -
DECREASE TRAVEL DISTANCE
DO NOT ADJUST
DOWN
LIMIT
BOTTOM VIEW
(screen case removed)
DO NOT
ADJUST!!
Ac
ce
ss
Pan
el
ROP
EWA
LKE
R C
ASE
(aud
ienc
e si
de v
iew
)
BOT
TOM
VIE
W
(sc
ree
n c
ase
rem
ove
d)
Access
Panel
Access
Panel
WARNING:
Screen case must be engaged or retracted inside the Ropewalker case when adjusting the limits.
1.
Refer to Figure 8 for the proper adjustment procedures.
2.
Position of screen can be adjusted using the white down limit setting screw:
- Turning the white screw counter clockwise will cause the screen position
to move farther down.
- Turning the white screw clockwise will cause the screen position to move up.
CAUTION:
Be sure all switches are in "off" position before
adjusting limit switches.
Please Note:
Limits are factory set for optimum performance. Any
adjustment of these limits could void the warranty. Please check
with Draper prior to resetting limits.
CAUTION:
Always be prepared to shut off manually when new
adjustment is being tested.
Figure 8
page 6 of 8
Ropewalker
